SUCTION STRAINER SINGLE 6"

The suction strainer shall be a N.A.S.D.A.N. polypropylene single strainer model number 0250-S-6-NH. The strainer frame shall be constructed from stress relieving 1/4" and 3/8" natural polypropylene material which are CNC machined. The strainer frame is to be reinforced with 304 stainless steel rods and hardware. Polypropylene rods shall be welded to the top and bottom of the strainer. A reinforcement and anti wear disc is to be secured to the bottom of the strainer. The strainer shall be of the hand woven polypropylene type. Flanged inserts must be installed at the top of the strainer for secure mounting of an anodized hose connection adaptor. The hose connector adaptor shall be secured with stainless steel hardware. No other suction strainer will be accepted.

SUCTION STRAINER DUAL 6"

The suction strainer shall be a N.A.S.D.A.N. polypropylene dual strainer and filter model number 00250-S-6-NH. The inner and outer strainer frames shall be constructed from stress relieving 1/4" and 3/8" natural polypropylene material which are CNC machined. The strainer and filter frames are to be reinforced with 304 stainless steel rods and hardware. Polypropylene rods shall be welded to the top and bottom of the strainer and filter. A reinforcement and anti wear disc is to be secured to both the bottom of the strainer and filter. The strainer and filter shall be of the hand woven polypropylene type. Flanged inserts must be installed at the top of the strainer for secure mounting of an anodized hose connection adaptor. The hose connector adaptor shall be secured with stainless steel hardware. No other suction strainer will be accepted.